PM002MNxB
PM002 is a 2M Bit/256K Byte capacity SPI (Serial Single-Wire) interface STT-MRAM (Spin-Transfer Torque Magnetic Random Access Memory) chip. Its data is non-volatile with a retention time exceeding 10 years. The chip supports independent 1-bit SI (Serial Input) and SO(Serial Output) interfaces, allows continuous writing or reading of data bytes at its maximum clock frequency, and features zero write latency.
PM001MNxB
PM001 is a 1M Bit/128K Byte capacity SPI (Serial Single-Wire) interface STT-MRAM (Spin-Transfer Torque Magnetic Random Access Memory) chip. Its data is non-volatile with a retention time exceeding 10 years. The chip supports independent 1-bit SI (Serial Input) and SO (Serial Output) interfaces, allows continuous writing or reading of data bytes at its maximum clock frequency, and features zero write latency.
SSP9323
SSP9323 is a high frequency, synchronous, rectified, step-down, switch-mode converter with internal power MOSFETs. It offers a very compact solution to provide a 3A continuous output current over a wide input supply range, with excellent load and line regulation. COT PSM control operation provides very fast transient response and easy loop design as well as very tight output regulation. The RY9320 requires a minimal number of readily available, external components and is available in a space saving ESOP-8 package.
SSP9322
SSP9322 is a high frequency, synchronous, rectified, step-down, switch-mode converter with internal power MOSFETs. It offers a very compact solution to provide a 2A continuous output current over a wide input supply range, with excellent load and line regulation. COT PSM control operation provides very fast transient response and easy loop design as well as very tight output regulation. The RY9320 requires a minimal number of readily available, external components and is available in a space saving SOT23-6 package.
PM004MNIB
PM004 is a 4M Bit/512K Byte capacity SPI (Serial Single-Wire) interface STT-MRAM (Spin-Transfer Torque Magnetic Random Access Memory) chip. Its data is non-volatile with a retention time exceeding 10 years. The chip supports independent 1-bit SI (Serial Input) and SO (Serial Output) interfaces, allows continuous writing or reading of data bytes at its maximum clock frequency, and features zero write latency.
PM004MNEB
PM004 is a 4M Bit/512K Byte capacity SPI (Serial Single-Wire) interface STT-MRAM (Spin-Transfer Torque Magnetic Random Access Memory) chip. Its data is non-volatile with a retention time exceeding 10 years. The chip supports independent 1-bit SI (Serial Input) and SO (Serial Output) interfaces, allows continuous writing or reading of data bytes at its maximum clock frequency, and features zero write latency.
PN256KNIA
The PN256K is a 256K Bit/32K Byte IIC interface non-volatile memory. It adopts advanced PMTJ STT-MRAM technology to achieve read and write transmission of up to 400kHz, with excellent reliability and more than 20 years of data retention time.
SSP1842
SSP1842 is a built-in clock calibration-free energy metering IC, which is suitable for single-phase multi-function electricity meters, smart sockets, smart home appliances and other applications, with more cost-efficient solution.
SSP1842 integrates 2 high-precision Sigma-Delta ADC to measure current and voltage simultaneously. Reference voltage, power management and other analog circuit modules, and processing active power, current and voltage RMS electrical parameters digital signal processing circuit.
SSP1842 can measure electric parameters such as current and voltage RMS, active power, active energy, fast current RMS (for over-current protection), and waveform output and so on. SSP1842 output data through the UART/SPI interface. It is available for the smart socket, smart appliances, single-phase multi-function power meter and information requirement of data acquisition in electricity applications.
SSP1842 has a patented anti-creep design, which can be combined with reasonable external hardware design to ensure that the noise energy cannot be calculated in the energy pulse when there is no load.
SSP7615
The SSP7615 is a high accuracy, low noise, high speed CMOS Linear regulator with low power consumption and low dropout voltage, which provide large output currents even when the difference of the input-output voltage is small. The devices offer a new level of cost effective performance in cellular phones, laptop and notebook computers, and other portable devices.
The current limiter’s fold-back circuit also operates as a short circuit protection and an output current limiter at the output pin.
The SSP7615 regulators are available in standard SOT23-3, SOT23-5 and DFN1×1-4 packages. Standard products are Pb-free and Halogen-free.
SSP7985
The SSP7985 series is a group of positive voltage output, three-pin regulators, that provide a high current even when the input/output voltage differential is small. Low power consumption and high accuracy is achieved through CMOS and laser trimming technologies.
The SSP7985 consists of a high-precision voltage reference, an error amplification circuit, and a current limited output driver. Transient response to load variations have improved in comparison to the existing series.
