SSP1855
The SSP1855 is a high accuracy electrical energy measurement integrated circuit with technical specifications that meet the accuracy requirements specified in IEC1036. The SSP1855 uses analogue circuitry only for the ADC and reference source, and digital circuitry for all other signal processing (such as multiplication and filtering), which allows the SSP1855 to maintain extremely high accuracy and long-term stability in harsh environmental conditions.The SSP1855 pins F1 and F2 output the average value of active power at a lower frequency and can be used to directly drive electromechanical meters or to interface with microcontrollers (MCUs). Pin CF outputs an instantaneous value of active power at a higher frequency for calibration or interfacing with an MCU.The SSP1855 contains an internal monitoring circuit for the VDD power supply pin. The SSP1855 remains in reset until VDD rises to 4V. When VDD falls below 4V, the SSP1855 is also reset, at which point there are no outputs from F1, F2, or CF.Internal phase matching circuitry allows the voltage and current channels to always be phase matched, regardless of whether the high pass filter (HPF) within channel 1 is on or off. An internal no-load threshold feature ensures that the SSP1855 has no latency at no load.The SSP1855 is available in a 24-pin SSOP package.
