SSP809
The SSP809 series are highly accurate, low power consumption voltage detectors, manufactured using CMOS and laser trimming technologies. A delay circuit is built-in to each detectors. Detect voltage is extremely accurate with minimal temperature drift. Both CMOS and N-ch open drain output configurations are available. Since the delay circuit is built-in, peripherals are unnecessary and high density mounting is possible.
ULN2803
ULN2803 is a single-chip integrated high voltage, high current Darlington tube array, The circuit contains eight independent Darlington tube drive single channel. The circuit is designed with continuous diode, which can be used to drive relay, stepping motor and other inductive loads. A single darlington collector can output 500mA current. Higher output current capacity can be achieved by connecting darlington tubes in parallel.
ULN2003
ULN2003 is a single-chip integrated high voltage, high current Darlington tube array, The circuit contains seven independent Darlington tube drive single channel. The circuit is designed with continuous diode, which can be used to drive relay,stepping motor and other inductive loads. A single darlington collector can output 500mA current. Higher output current capacity can be achieved by connecting darlington tubes in parallel.
SSP584X
SSP584X series is a Quad-channel digital isolator, using chip level high voltage isolation process, isolation voltage up to 5KVrms. This series of products have low radiation, excellent anti-electromagnetic interference performance, high transmission rate and low power consumption; Equipped with enable pins to place the output in a high impedance state.
It has fail-safe mode, which can restore the output to the default state when the input power loss. This series of products have 4 in 0 out, 3 in 1 out, 2 in 2 out and other specifications, the specific product information, see the product selection table.
SSP9810
The SSP9810 is a high frequency, synchronous, rectified, step-down, switch-mode converter with internal power MOSFETs. It offers a very compact solution to achieve a 1.2A continuous output current over a wide input supply range, with excellent load and line regulation.The SSP9810 requires a minimal number of readily available, external components and is available in a space saving SOT23-6 package.
SSP9481
The SSP9481 is a monolithic, step-down, switch-mode converter with a built-in power MOSFET. Current-mode operation provides a fast transient response and eases loop stabilization.
The wide input Voltage range (4.5V to 80V) provides high efficiency output of 1A current. Low shutdown mode quiescent current of 0.1μA is suitable for battery-powered applications.
Fail-state protection includes cycle-by-cycle current-limiting protection and thermal shutdown protection.
SSP9480
The SSP9480 is a monolithic, step-down, switch-mode converter with a built-in power MOSFET. Current-mode operation provides a fast transient response and eases loop stabilization.
The wide input Voltage range (4.5V to 80V) provides high efficiency output of 1.2A current. Low shutdown mode quiescent current of 0.1μA is suitable for battery-powered applications.
Fail-state protection includes cycle-by-cycle current-limiting protection and thermal shutdown protection.
SSP9461
The SSP9461 is a monolithic, step-down, switch-mode converter with a built-in power MOSFET. Current-mode operation provides a fast transient response and eases loop stabilization.
The wide input range(4.5V to 60V) provides high efficiency output of 1.2A current. Low shutdown mode quiescent current of 0.1μA is suitable for battery-powered applications.
Fault state protection includes Cycle by Cycle OCP and thermal shutdown protection.
SSP9459
The SSP9459 is a monolithic, step-down, switch-mode converter with a built-in power MOSFET. It achieves a 0.5A peak-output current over a wide input supply range with excellent load and line regulation. Current-mode operation provides a fast transient response and eases loop stabilization.
The wide input range(4.5V to 60V) provides high efficiency output of 0.5A current, Low shutdown mode quiescent current of 0.1μA is suitable for battery-powered applications.
Fault condition protections include cycle-by-cycle current limiting and thermal shutdown.
SSP9451
The SSP9451 is a high frequency (1.8MHz) step-down switching regulator with integrated internal high-side high voltage power MOSFET. It provides single 0.6A(or less) highly efficient output with current mode control for fast loop response.
The wide input range(4.2V to 40V) accommodates a variety of step-down applications under mobile environment input conditions.Low shutdown mode quiescent current of 1μA is suitable for battery-powered applications.
High efficiency at light load condition is achieved by scaling down the switching frequency to reduce the switching and gate driving losses.The frequency folding technique helps prevent the inductance current from running out of control at startup. Hot shutdown provides reliable, fault tolerant operation.
