SSP485N
The SSP485N is a half-duplex high speed transceiver for RS-485 communication. IC contains one driver and one receiver, It has adaptive function.
The SSP485N has a fail-safe circuit，ensure logical high level of receiver output when receiver input is open or short.
The SSP485N receiver has 1/8 unit load input impedance, allows up to 256 devices can be attached to the bus.
SSP54123
SSP54123 is designed for use in earth leakage circuit interrupters for operation directly off the AC line in breakers; It includes voltage regulator,amplifier, Latch, etc. The circuits can absorb the external surge voltage and improve the anti-interference ability of the chip in high voltage, spike pulse and high-frequency electromagnetic. Improve the chip Stable reliability.
SSP9810
The SSP9810 is a high frequency, synchronous, rectified, step-down, switch-mode converter with internal power MOSFETs. It offers a very compact solution to achieve a 1.2A continuous output current over a wide input supply range, with excellent load and line regulation.The SSP9810 requires a minimal number of readily available, external components and is available in a space saving SOT23-6 package.
SSP9481
The SSP9481 is a monolithic, step-down, switch-mode converter with a built-in power MOSFET. Current-mode operation provides a fast transient response and eases loop stabilization.
The wide input Voltage range (4.5V to 80V) provides high efficiency output of 1A current. Low shutdown mode quiescent current of 0.1μA is suitable for battery-powered applications.
Fail-state protection includes cycle-by-cycle current-limiting protection and thermal shutdown protection.
SSP62FJ
The SSP62FJ series is a group of positive voltage output, three-pin regulators, that provide a high current even when the input/output voltage differential is small. Low power consumption and high accuracy is achieved through CMOS and laser trimming technologies.
The SSP62FJ consists of a high-precision voltage reference, an error amplification circuit, and a current limited output driver. Transient response to load variations have improved in comparison to the existing series. SOT-89-3L packages is available.
SSP9480
The SSP9480 is a monolithic, step-down, switch-mode converter with a built-in power MOSFET. Current-mode operation provides a fast transient response and eases loop stabilization.
The wide input Voltage range (4.5V to 80V) provides high efficiency output of 1.2A current. Low shutdown mode quiescent current of 0.1μA is suitable for battery-powered applications.
Fail-state protection includes cycle-by-cycle current-limiting protection and thermal shutdown protection.
SSP9461
The SSP9461 is a monolithic, step-down, switch-mode converter with a built-in power MOSFET. Current-mode operation provides a fast transient response and eases loop stabilization.
The wide input range(4.5V to 60V) provides high efficiency output of 1.2A current. Low shutdown mode quiescent current of 0.1μA is suitable for battery-powered applications.
Fault state protection includes Cycle by Cycle OCP and thermal shutdown protection.
SSP61C
The SSP61C series devices are a set of three terminal low power voltage detectors implemented in CMOS technology. Each voltage detector in the series detects a particular fixed voltage ranging from 0.9V to 5.0V. The voltage detectors consist of a high-precision and low power consumption standard voltage source as well as a comparator,hysteresis circuit, and an output driver (CMOS inverter or NMOS open drain). CMOS technology ensures low power consumption.
Although designed primarily as fixed voltage detectors, these devices can be used with external components to detect user specified threshold voltages.
SSP9459
The SSP9459 is a monolithic, step-down, switch-mode converter with a built-in power MOSFET. It achieves a 0.5A peak-output current over a wide input supply range with excellent load and line regulation. Current-mode operation provides a fast transient response and eases loop stabilization.
The wide input range(4.5V to 60V) provides high efficiency output of 0.5A current, Low shutdown mode quiescent current of 0.1μA is suitable for battery-powered applications.
Fault condition protections include cycle-by-cycle current limiting and thermal shutdown.
LM317
The LM317 device is an adjustable three-terminal positive-voltage regulator capable of supplying more than 1.5A over an output-voltage range of 1.25V to 37V. LM317 features a very low standby current 1.5mA .LM317 is available in SOT-223, TO-252, TO263-2, TO-220 and SOT89-3 package.
